Product Features & Benefits

TOP SIDE VINYL

Top grade 29 oz. marine vinyl with 100% polyester reinforced backing.

All of the vinyl used to manufacture an Ideal Spa Cover is purchased from ISO 9001 suppliers. This vinyl is exclusively produced by the leader in the industry (SPA- TECH ™- SPASHIELD ™).

Treated with high levels of mildew and UV inhibitors, it passes 1500 hrs. in the testing machine "Weatherometer".

Vinyl used for automobiles fails at 300 hrs.
Marine Grade Vinyl without these protectants fail at 500 hrs.

BOTTOM SIDE VINYL

11 ounce scuff resistant double-laminated vinyl with polyester - Weft reinforcing scrim, with -40 degree cold crack*.

Resists normal wear against spa chemical and sanitation methods.

This bottom side vinyl is so strong we use it throughout our spa covers for over 20 points of internal reinforcing.

* Weft: a crosshatch weave, creates an interlocking fiber and provides extremely strong vinyl.

FOAM CORES

We use only moisture-resistant, virgin polystyrene, not formed-reground or scrap foam, as found in inferior covers. The foam is tapered 4"-2" (pitched) this allows for the greatest water run off rate available, twice that of most of our competitors. This adds longer life to an Ideal Spa Cover even in very wet climates.

Depending on the density of foam you select, our foam's R-Value ranges from R-15 for 1lb density foam to R-19 for 2lb density foam and R-22 for Super Nova Super Foam.

CHANNEL REINFORCEMENT

C-channels are countersunk into special grooves in the core for superior structural integrity using 20 gauge galvanized steel. The "C" channel are manufactured with special reverse ribs for 30% greater strength than other "C" channels. This provides durable support across the center of the cover.

VPB 3000 (VAPOR PROOF BARRIER)

All foam cores after being reinforced are completely sealed in Ideals exclusive V.P.B. 3000 technique. This unique proprietary material, along with our state-of-the-art vacuum-sealing equipment, makes Ideal's foam cores 10 times more resistant to moisture than standard 3 and 4 mil polyethylene film used by other spa cover manufacturers. (Double Wrap Available).

This exclusive, confidential sealing method assures a complete, perfect seal every time,which guarantees an Ideal Spa Cover foam panel will not absorb water.

HEAT SEAL GASKETS

Ideal Spa Covers have two revolutionary insulating gaskets located under each half side of the cover, where the cover halves fold together.

Heat seal gaskets prevent heat loss in the location between the two cover halves. They seal automatically when the cover is closed.

Each heat seal gasket is a vinyl square that is insulated, then sewn into place. No threads are used on the underside. This assures sewing stays intact even if the cover is dragged.

Ideal Spa Covers heat seal gaskets protect the bottom of the cover from damage when the cover is removed and left to stand on rough surfaces.

Heat seal gaskets and our special design is an Ideal Spa Cover innovation.

HINGE

Ideal Spa Covers' hinge has four layers of our tough vinyl as internal reinforcement.

The hinge is double stitched to the top vinyl for added strength and durability. This means added strength to this high stress area.

This extremely strong 1" hinge allows our spa covers easy compatibility to the many cover removal systems on the market today.

The Ideal hinge was put to the test when an Ideal Spa Cover was hooked up to an automatic arm with a SUPERLIFT2™. The cover was lifted on and off over 8000 times with no significant wear to the hinge.

DRAIN GROMMETS

Drain grommets are placed on the bottom vinyl.

They are non-corrosive and are made of industrial grade acetyl nylon.Drain grommets prevent water from accumulating between vinyl and polyethylene.

Low profile, made not to protrude, the grommets will not scratch the lip of the spa as cover is slid off.

ZIPPER

Ideal Spa Covers use a commercial grade, true #5 nylon zipper.

The zipper is protected from damage by a protective vinyl flap along the entire length of the zipper - the flap is reinforced at the corners to promote long life of flap and zipper.

The zipper pull has its own pocket which neatly tucks out of the way and can easily be unzipped to replace the foam cores if need be.

HANDLES, GAZEBO HANDLES, AND TIE DOWN STRAPS

Handles and tie down are extremely strong and cross stitched and reinforced for added strength and durability.

Ideal Spa Covers uses tough bottom vinyl to reinforce these high stress areas, assuring long life and trouble-free use.

Gazebo handles are unique handles located along the zipper portion of the cover, making them ideal in gazebo applications as well as with cover removal systems.

LOCKING TIE DOWN HARDWARE (SURE-LOC FASTENERS)

Ideal Spa Covers' locks are modeled after the quick-release buckles found on sports equipment today and were designed specifically to meet standards set by ASTM for Safety Spa Covers.

Each lock may be individually locked with a key provided.

They can be easily installed with stainless steel screws supplied in the hardware packet provided.

These attractive locks are a safer alternative to the now archaic, twist-lock style.

THREAD, SEWING AND FINISHING TOUCHES

Ideal Spa Covers uses polyester thread treated with UV and mold inhibitors.

Polyester thread holds up to years of sunlight, weather, and chemicals.

Polyester thread has a nice finish, not unlike that of fine leather goods.

Cotton-wound polyester thread is used for strength and fine finish.

Ideal's cotton-wound thread meets the Los Angeles Standard for repelling harnesses.

Cotton-wound polyester thread expands to inhibit water penetration through sewing holes.

Ideal Spa Covers uses a locking backstitching to assure no unraveling. Consistent stitching and clean tie offs make a stronger spa cover.

Ideal also uses their signature Welting Design, which gives a four layer seam that is extremely durable.

The professional sewing of all Ideal Covers is highly supervised by the original experts in sewing construction.

Colours Available

Almond	Beige	Cranberry
Dark Grey	Forest Green	Light Grey
Navy Blue	Rust	Teal
Tropical Blue	Wildwood